Pavers

Pedestal/Roof Deck System Components

Pedestal/Roof Deck System Components

Terra-System One Components

In addition to Terra-Pavers, Terra-System One is comprised of a number of components used in the installation processes. Also, see our Lok-Down System page for more information on our roof deck lock down system.

  • New Terra-Stand

    The Terra-Stand is made of a high impact copolymer polypropylene, adjusts from 2" to 21" in height and slope compensates up to 5/8" to provide a level installation. An average project will require one Terra-Stand for each Terra Paver, plus the perimeter. No fill required.

  • Terr-Adjust Paver Pedestals

    High impact styrene adjustable paver pedestals telescope from 2" to 5-1/2", tilt to accommodate sub-surface slope and create a smooth, uniform, non-slip surface. Reducers are used in areas under 2", and extenders are used in areas over 5-1/2".

  • Spacer

    Available in 1/8", 3/16", and 1/4" spacing

  • Reducers

    With 3/8" adjustment rings for heights between ½" and 2"

  • Standard Terr-Adjust Pedestals

    Minimum adjustment 2" with outside base diameter of 6-1/8". Maximum adjustment of 5-1/2", with base contact area of 29-1/2"

  • Terra-System One Mix

    Specially formulated concrete mixture for filling the Terr-Adjust cavity after adjustment to desired height and slope is made.

    Supplied in 100 lb. bags. One bag fills an average of 20-25 Terr-Adjusts. The pre-blended dry concrete mix meets ASTM C387 specs.

  • Extender Pedestals

    Used with Terr-Adjust pedestals to extend heights over 5-1/2" to 10" Maximum adjustment of 5-1/2", with base contact area of 29-1/2"

  • Terra-Tabs

    SBR Rubber spacing unit for pavers

    Tab
    Spacer
    No.5

    5x5x3/8"

    3/16"

    No.5A

    5x5x3/8"

    1/8"

    No.6

    6x6x7/16"

    3/16"

    No.6A

    6x6x7/16"

    1/8"

    No.7

    7x7x1/2"

    3/16"

  • Terra-Shim Plates

    SBR Rubber unit for shimming pavers

    Shim
    No.5

    5x5x1/8"

    No.5

    5x5x1/4"

    5x5x1/16"

    No.6

    6x6x1/8"

    No.7

    7x7x1/8"

Other Terra-System One Tools

  • Stair-Tab

    SBR rubber tread supports (3" x 7-1/2" x 3/8") align treads or copings over sub-surfaces while allowing for drainage and air circulation.

  • Standard Blok Handle

    Use for pavers up to 24" for installation or removal of Terra-Pavers

  • Big Blok Handle

    Use for pavers over 24", 30", and 36" for installation or removal of Terra-Pavers

  • Back Saver

    Use for pavers over 24", 30", and 36" for installation or removal of Terra-Pavers

  • Mini Pallet Jack

    Use for pallets 24" wide. Inquire for pricing.